Loading ...
Loading ...
Loading ...
25
ADJUSTMENT
Programme Aut 40° Normal is controlled via exhaust air temp. sensor
Programme Aut 40° Extra is controlled via exhaust air temp. sensor and a time factor.
Programme Aut 60° Normal is controlled via exhaust air temp. sensor.
Programme Aut 60° Extra is controlled via exhaust air temp. sensor and a time factor.
The automatic programmes stop automatically when the washing is dry.
To decide whether the washing is dry, the actual exhaust air temperature is compared with a
parameter, P2014 for 40° programmes and P2024 for 60° programmes.
For Aut 40° Extra, an extra drying time is also added according to parameter P2015.
For Aut 60° Extra, an extra drying time is also added according to parameter P2025.
It is primarily these four parameters that are adjusted to optimise the drying processes of the
automatic programmes.
Aut 40° Normal and Aut 40° Extra are adjusted with parameter P2014.
Aut 40° Extra is additionally adjusted with parameter P2015 (extra drying time).
Aut 60° Normal and Aut 60° Extra are adjusted with parameter P2024.
Aut 60° Extra is additionally adjusted with parameter P2025 (extra drying time).
If it is found that the washing does not dry suffi ciently, the parameter value is increased.
If it is found that the washing is over-dried, long drying time, the parameter value is reduced.
Drying processes must always be optimised in small steps; start by adjusting the parameter
concerned 1-2 units up or down. Then check the result after the next drying process and if necessary
make a further adjustment.
784509au_en.indd 25784509au_en.indd 25 21. 02. 2022 08:26:3121. 02. 2022 08:26:31
Loading ...
Loading ...
Loading ...