Loading ...
Loading ...
Loading ...
15
______________________________________
The drying cabinet should be connected using
the connecting cable supplied to an earthed wall
socket and must not be permanently wired.
______________________________________
The socket should be positioned so that the plug
can be easily pulled out if necessary.
______________________________________
Check that the supply current matches the data
on the rating plate and that the mains lead is
earthed correctly according to current standard.
We recommend fi tting the mains lead with a
residual current device (RCD).
______________________________________
The dryer should be connected to a dedicated
circuit.
______________________________________
Do not connect the drying cabinet to the
power supply with an extension lead as the
necessary safety cannot be guaranteed (risk of
overheating).
_____________________________________
_____________________________________
Electrical connection of the appliance should
comply with applicable electrical safety
regulations.
______________________________________
The manufacturer disclaims all liability if the
electrical connection has not been carried out in
the way described in this use and care manual.
______________________________________
If the power cord for any reason is damaged, it
must be replaced. A genuine part can obtained
from the cabinet dealer. A replacement cord may
only be installed by a qualifi ed electrician.
______________________________________
ELECTRICAL CONNECTION
The drying cabinet should be connected to a 230 V single-phase 50-60 Hz and earthed wall socket.
Fuse 10 A.
The drying cabinet is supplied ready for connection with a cable with an earthed plug.
784509au_en.indd 15784509au_en.indd 15 21. 02. 2022 08:26:2921. 02. 2022 08:26:29
Loading ...
Loading ...
Loading ...