Loading ...
Loading ...
Loading ...
12
89
3
2
6
4
7
5
1. Pre-drilled holes
2. Plastic plug
3. Wall behind drying cabinet
4. Fixing screws
5. Washer
6. Rear wall of drying cabinet
7. Cover plug
8. Spirit level
9. Cover plug
PLACEMENT
______________________________________
The drying cabinet is only intended for use
indoors in a dry area.
______________________________________
Do not place the drying cabinet in an area where
high-pressure water is used for cleaning.
______________________________________
LEVELLING
The drying cabinet must stand level on a fl at
surface, resting on all four feet. Use the Allen
key supplied and adjust the feet from inside the
cabinet. Press the four covering plugs fi rmly into
the holes.
SECURING TO WALL
The cabinet must be secured to a wall to prevent
it from tipping over.
1 Open the door, slide out the upper hang-
ing section, and drill 8 mm holes in the wall
through the two pre-drilled holes in the rear
of the drying cabinet
2
Install the plastic plugs in the wall. Mount the
screw and the washer as illustrated. Press the
cover plugs fi rmly into the holes.
Screws are provided in the assembly kit.
______________________________________
CAUTION: The drying cabinet must not be used
without being screwed into a wall due to the risk
of tipping over.
______________________________________
1
784509au_en.indd 12784509au_en.indd 12 21. 02. 2022 08:26:1221. 02. 2022 08:26:12
Loading ...
Loading ...
Loading ...