Loading ...
Loading ...
Loading ...
21
TIPS
If you have made a mistake or are unsure where you are, you can always press ON/OFF and start
selecting drying programme again.
If the door is open when a drying programme starts and the OK button is activated, the display
will show ‘CLOSE DOOR’. Close the door, and the selected drying programme will start.
The animated symbol (bar) on the left-hand side of the display indicates that the drying process
is under way.
When the drying process has fi nished, the text “END” (fl ashing) appears. When the STOP button
is then pressed, or the door is opened, the current programme stops and the display shows the
last used programme.
NB: In standby mode the display becomes unlit after 15 min and lights up when one of
the buttons on the control panel is activated or the door is opened.
To halt a drying programme that is in progress, press STOP.
If the door is opened while the drying process is in progress, the fan will continue to run for
another 5 minutes. The display will show “CLOSE DOOR” and count down a 5-minute programme
pause period.
If the door is closed within this 5-minute period, the drying process re-starts.
If the door is left open, the drying process is halted after 5 minutes and must be re-started
manually.
If you want to halt the drying process immediately, without a 5-minute pause, press STOP.
784509au_en.indd 21784509au_en.indd 21 21. 02. 2022 08:26:3021. 02. 2022 08:26:30
Loading ...
Loading ...
Loading ...