Loading ...
Loading ...
Loading ...
8
13. PREPARE DECORATIVE FLUE
HO0271
LOWER FLUE
REAR NOTCH
Remove protective plastic film covering the lower flue only.
Peel off both corners at the top of the upper flue (note that upper part has one hole on left and right
sides; see image on the right).
Position the lower flue rear notches down.
Gently slide upper flue inside lower flue.
Both lower and upper flues are included with the hood, but for a 10-ft. to 11-ft. ceiling, discard the
provided upper flue and use the optional extension flue, part no. AEWC53SB.
14. INSTALL DECORATIVE FLUE
Carefully slide in place decorative flue base (notches end first) in the groove
(shaded part in inset at right) behind the exterior wall of the top of the hood.
Slide up the upper flue until it is aligned with its mounting bracket. The bracket must be
inside the flue. Secure the upper flue to its bracket using 2 no. 8 x 3/8” screws (included).
See illustration beside.
NOTE: Duct not shown in illustration to ease understanding.
Remove protective plastic film covering the upper flue.
HO0140
UPPER FLUE MOUNTING BRACKET
FRONT VIEW
UPPER
FLUE
HO0272
Loading ...
Loading ...
Loading ...