Loading ...
Loading ...
Loading ...
4
Getting Ready
1
[OUTPUT LEVEL] knob
Adjusts the volume of the RC-600.
Display
Shows various information of the RC-600.
[1]–[4] knobs
Use these knobs to set the parameter values shown in the screen.
[1] [2] [3] [4]
5 To change a value in larger steps, turn a knob while pressing it.
5 For some parameters, you must press the knob to edit the
value.
2
[MENU] button
This button gives you access to the overall system settings and
USB/MIDI settings of the RC-600.
[LOOP] button
Press this button to edit a memory.
Use this to congure the settings for tracks 1–6, settings related
to loop playback/recording and so on, input FX/track FX settings,
rhythm settings and the memory name.
[RHYTHM] button
Each time you press the button, the rhythm switches on (lit)/o
(unlit)/standby (blink).
[TAP TEMPO] button
Set the tempo by pressing this button at the desired interval
(tap tempo). When doing this, the tempo is shown on the screen.
Long-press the button to return to the previous tempo.
3
[EXIT] button
Press to return to the previous screen.
[ENTER] button
Press to conrm an operation.
5 If you press the [ENTER] button while the play screen is
shown, the screen switches to the MIXER screen (p. 8).
5 By pressing the [EXIT] button and [ENTER] button
simultaneously, you can save a memory (write) or erase
(clear) memory data.
PAGE [
K
] [
J
] buttons
Use these buttons to move the cursor and switch between pages.
If you press these buttons while the play screen is shown, you can
switch between variations of the play screen.
LOCK function
In the play screen, press the PAGE [K] [J] buttons simultaneously
to turn the lock function on, so that the [1]–[4] knobs are
disabled. This lets you prevent the settings from being changed
inadvertently.
The Lock function turns o when you press the two buttons
simultaneously once again.
4
Loop indicators
Indicates the track’s status and loop position.
Top Panel
1
4
2
3
5
6
Loading ...
Loading ...
Loading ...