BOSS RC-600 User Manual

Loading ...

Saving a Memory

Saving a Memory (WRITE)

If you select a dierent memory or turn o the power after

recording or editing the settings, the recorded content or edited

settings are lost. If you want to keep the data, you must save it.

1. Press the [EXIT] button and [ENTER] button

simultaneously.

The WRITE screen appears.

2. Press the [1] or [2] (WRITE) knob.

3. Turn the [1]–[4] knobs to select the memory to which

you want to save.

5 This procedure is not required if the memory number is

acceptable as is.

5 If you decide to cancel, press the [EXIT] button.

4. Press the [ENTER] button.

The memory is saved.

* Make sure not turn to o the power while the “EXECUTING...”

message is shown.

MEMO

You can assign a name to the memory. For details, refer to

“Parameter Guide” (PDF).

Erasing Data from a Memory (CLEAR)

You can erase the data that is saved in a memory, clearing that

memory to an empty state.

1. Press the [EXIT] button and [ENTER] button

simultaneously.

The WRITE screen appears.

2. Press the [3] or [4] (CLEAR) knob.

3. Turn the [1]–[4] knobs to select the memory you want

to clear.