Loading ...
Loading ...
Loading ...
22
Controlling Devices via MIDI
Controlling the RC-600 from an External MIDI Device
Overview Explanation
Receiving tempo data and data for starting and stopping playback
The RC-600 will synchronize to the
tempo of MIDI Clock data from an
external MIDI device.
Setting the RC-600 to the same tempo as an external MIDI device
Make settings on your external MIDI device so that it will transmit MIDI Clock and MIDI Start/Stop
data. For details, refer to the owner’s manual of your device.
Set the RC-600’s SYNC CLOCK (p. 19) to “AUTO”.
* You can’t switch the tempo during recording.
Start/stop data will be received
from an external MIDI device to
play/stop the RC-600.
Receiving MIDI Start
When MIDI Start (FA) is received, all tracks will play (All Start).
Switching memories
The RC-600’s memories switch
simultaneously upon receipt of
corresponding Program Change
messages from external MIDI
devices.
Switching memories
You can switch the RC-600’s memories with Program Change messages from external MIDI devices.
You can receive Program Change messages numbered 1 through 99, corresponding to the 99
individual memories 01–99.
* Program Change messages 100–128 cannot be received.
* Even if received, Bank Select MIDI messages (Control Change #0, #32) are disregarded.
Receiving Control Change messages
The RC-600 can be controlled
using Control Change messages
from external MIDI devices.
Receiving Control Change messages
You can use Control Change messages from an external MIDI device to control functions that
would be dicult to control using the RC-600’s own controllers.
In the “ASSIGN” (p. 18) setting, set SOURCE to “MIDI CC#1–#31, CC#64–#95”, and select the
parameter that you want to control in TARGET.
Connecting Two RC-600 Units
Two RC-600 units can be synchronized after connecting them together using a MIDI cable.
MIDI OUT MIDI IN
Transmitting unit Receiving unit
5 Begin recording on the tracks of the transmitting RC-600.
5 When you press the [ALL START/STOP] button on the transmitting RC-600, the receiving RC-600 also plays back.
* The receiving RC-600 performs an “all start” when tracks start playing back on the transmitting RC-600.
5 Tracks for which TEMPO SYNC SW (p. 15) is “ON” play at the tempo set in the memory of the transmitting unit.
5 Tracks for which LOOP SYNC SW (p. 15) is “ON” loop in time with the rst-recorded phrase on the transmitting RC-600.
Loading ...
Loading ...
Loading ...