Loading ...
Loading ...
Loading ...
(_rencFal
information
about halogen/
radiant surface
units
The halogen/radiant cooktop teatures heating
units beneath a smooth glass ceramic surtace.
The surthce units are shown by outlines on the
glass.
Betore you use the cooktop for the first time,
clean it with Cooktop (leaning Cream. This
helps protect the top and makes clean-up easier.
NOTE: A slight odor is normal when a new
cooktop is used for the first time. It is caused by
the heating of new parts and insulating
materials and will disappear in a short time.
When a surthce unit is turned on, coils beneath
the surt, tce unit radiate heat through the glass
to the cookware. The red glow of the coils will
be visible through the glass. It will take the
surthce unit a tew moments to heat up. The
coil cycles on and off to maintain your selected
control setting. With poor cookware, you will
see fiequent cycling of the unit off and on.
Good, flat cookware _dll minimize the cycling.
Use onlyfla/-bot/omed cookware. Do not let pots
boil dry. Overheated metal can bond to glass
cooktop. An overheated copper pot will leave a
residue that will permanently stain the glass.
Sliding ahmfinum cookware across the glass
may leave metal marks. These metal marks
will appear as small scratches. They can be
removed with ( ooktop Cleaning (ream and
a razor scraper.
It is safe to place hot cookware tiom the oven
or surtace on the glass ceramic surtace when
the surtace is cool.
Avoid sliding pans on the glass cooktop. Pan
edges that are even slightly rough or grit on the
cooktop can cause scratches on the glass.
Even after the surthce units are turned off, the
glass ceramic cooktop retains enough heat to
continue cooking. To avoid overcooking,
remove pans tiom the surthce units when the
tood is cooked. Avoid placing anything on the
surtace unit until it has cooled completely.
Differences
between
halogen and
radiant
surface units
Some cooktops have both radiant and halogen
surthce units. This is how they differ.
•Halogen units are much brighter than the
radiant units. Radiant units have a dull red
glow.
•Halogen and radiant units cycle on and off
tiequently. This is normal. You will notice the
cycling more on the halogen units because of
their brightness.
•Radiant coils take about 10 seconds longer to
glow than halogen units.
Halogen units have radiant coils in the center that do not glow
as brightly as the outer halogen coils.
11
Loading ...
Loading ...
Loading ...