Loading ...
Loading ...
Loading ...
This mode could be unavailable if your
vehicle is below operating temperature.
Warm up your vehicle and attempt the
procedure again.
Do not tow your vehicle in this mode. Failure
to follow these instructions could result in
vehicle damage not covered by the vehicle
warranty.
ENTERING TEMPORARY NEUTRAL
MODE
1. Bring your vehicle to a complete stop.
2. Press and hold the brake pedal.
3. Power your vehicle on.
4. Shift into neutral (N).
Note: An instructional message appears.
5. Shift into neutral (N) again.
Note: A confirmation message appears
when your vehicle enters the mode.
6. Release the brake pedal.
Note: Your vehicle is free to roll.
7. Switch your vehicle off.
Note: Do not tow your vehicle in this mode.
Note: The neutral (N) indicator on the
selector may flash in this mode.
EXITING TEMPORARY NEUTRAL
MODE
1. Press the brake pedal.
2. Shift into park (P), or power your vehicle
on and shift into drive (D) or reverse (R).
AUTOMATIC RETURN TO PARK (P)
HOW DOES AUTOMATIC RETURN TO
PARK (P) WORK
Your vehicle shifts into park (P) if you attempt
to exit your vehicle without the vehicle in
park (P).
Your vehicle shifts into park (P) when your
vehicle is stationary and any of the following
occur:
• You switch the vehicle off.
• You open the driver door with the driver
seatbelt unfastened.
• You unfasten the driver seatbelt when
the driver door is open.
Note: Do not use automatic return to park
(P) when your vehicle is moving, except in
an emergency. See Starting and Stopping
the Engine (page 199).
AUTOMATIC RETURN TO PARK (P)
LIMITATIONS
Automatic return to park (P) may not work if
any of the following occur:
• The driver door ajar sensor is
malfunctioning.
• The driver seatbelt sensor is
malfunctioning.
See an authorized dealer if any of the
following occur:
222
2024 Navigator (TB9) Canada/United States of America, enUSA, Edition date: 202306, DOM
Automatic Transmission
Loading ...
Loading ...
Loading ...