Karcher 1.698-917.0 High pressure cleaner HDS 9/14-4 ST

Bedienungsanleitung - Page 10

For 1.698-917.0.

PDF File Manual, 176 pages, Read Online | Download pdf file

1.698-917.0 photo
Loading ...
Loading ...
Loading ...
– 2
It should have the cross-sec-
tion and length outlined in the
instructions
Protect it with spray water
guard
It should not lie in water.
The mains plug and the cou-
pling of an extension cable
must be watertight and must
never lie in water. Moreover,
the coupling may never lie on
the ground. The use of cable
reels that ensure that the
sockets are at least 60 mm
above the ground is recom-
mended.
Electrical connecting wires or
extension cables must not be
damaged through being driv-
en over, crushed, or pulled or
the like. Protect the cable
from heat, oil, and sharp edg-
es.
Check high power cable, ex-
tension cables and hoses for
damage every time before
use.
Never direct the water jet on
electrical devices/systems or
on this system itself.
All current-conducting parts
in the working area must be
protected against jet water.
Set the main switch to OFF
and pull out the mains plug
before carrying out any tasks
- cleaning or maintenance
tasks - on the unit. Secure the
main switch against being
switched on inadvertently.
The system may only be con-
nected to an electrical supply
which has been installed by
an electrician in accordance
with IEC 60364-1.
When power comes back
suddenly after a power fail-
ure, then the plant can get
switched on in an uncon-
trolled manner. Hence, when
there is power failure: Switch
off the plant.
Never direct the water jet on
human beings, animals, the
appliance or electrical parts.
Cordon off the working area
to prevent persons coming
close to the machine when it
is being operated.
Before starting any work on
the system and after the work
is concluded, release the
pressure. For this, pull the le-
ver of the handspray gun
when the system is switched
off.
The following parts of the sys-
tem and their accessories are
subject to high water pres-
sure. These elements must
be tested for damages prior to
each use of the system:
Pump head
High pressure hose
Risk in the event of power
failure!!
Danger by hot water
(scalding) and high water
pressure!
10 EN
Loading ...
Loading ...
Loading ...