Loading ...
Loading ...
Loading ...
P-S500 Owner’s Manual
31
Connecting to other devices
Using an external speaker system for listening to sounds from the instrument
You can connect a stereo system to amplify the instrument’s sound by using the AUX OUT [R]/[L/L+R]
jacks. The sound input from the [AUX IN] jack and the [MIC INPUT] jack is output at the same time.
NOTICE
• To avoid possible damage, first turn on the power to the instrument, and then to the external device. When turning off the
power, first turn off the power to the external device, and then to the instrument. Since this instrument’s power may
automatically be turned off due to the Auto Power Off function (page 29), turn off the power to the external device, or disable
Auto Power Off when you do not intend to operate the instrument.
• Do not route the output from the AUX OUT jacks to the [AUX IN] jacks. If you make this connection, the signal input at the [AUX
IN] jacks is output from the AUX OUT jacks. These connections could result in a feedback loop that will make normal
performance impossible, and may even damage the equipment.
NOTE
• Use only the [L/L+R] jack for connection with a monaural device.
• Use an appropriate adaptor plug if the input jack of the powered speaker does not match the phone plug of the audio cable.
• Use audio cables and adaptor plugs having no (zero) resistance.
• When you are monitoring the sound output via the AUX OUT jacks from headphones connected to the instrument, we recommend that
you set the Binaural Sampling and Stereophonic Optimizer functions (page 19) to off. These can be turn on or off from [Utility]
[Sound Setting] [Binaural] on Smart Pianist.
By connecting a microphone to the [MIC INPUT] jack (standard mono phone jack), you can enjoy singing
along with your keyboard performance or with Song playback. The instrument outputs your vocals
through the built-in speakers. Moreover, you can apply various harmony effects (called Vocal Harmony) to
your singing voice from [Utility] → [Mic Setting] on Smart Pianist.
1 Before turning on the power of the instrument,
set the [MIC VOLUME] knob to the minimum
position.
2 Connect the microphone to the [MIC INPUT]
jack.
NOTE
Make sure you have a conventional dynamic microphone.
3 Turn on the power of the instrument.
4 (If necessary, turn on the microphone.) Adjust the [MIC VOLUME] knob while
singing into the microphone.
5 After you finish your performance, turn the [MIC VOLUME] knob to the
minimum position, and then disconnect the microphone.
Connecting a microphone – [MIC INPUT] jack
Instrument Powered speaker
Standard phone plug (1/4")
Standard phone plug (1/4")
Audio cable
Audio signal
Input jack
1
2
Standard mono
phone plug (1/4")
Loading ...
Loading ...
Loading ...