Loading ...
Loading ...
Loading ...
80
Chapter 10 VCI Manager Operations
This application allows you to pair up the Display Tablet with the VCI device, check the
communication status, and update the VCI software.
Figure 10-1 Sample VCI Manager Screen
1. Connection Mode – there are three connection modes available for selection.
The connection state is displayed alongside.
⚫ BT Paring – when paired to a wireless device, the connection state displays
as Paired; otherwise it displays as Unpaired.
⚫ Update (for VCI software only) – updates VCI software via internet through
the MaxiCOM tablet networking using USB connection.
2. BT Setting
The BT Setting screen displays the type and a partial serial number for all of the
devices available for pairing. Tap a required device to start pairing. The BT status
icon displayed to the left of the device name indicates the received signal
strength.
10.1 BT Pairing
The VCI device needs to be connected to a vehicle, so that it is powered up
during the synchronization procedure. Make sure the Display Tablet has
sufficient battery level or is connected to an AC/DC power supply.
Loading ...
Loading ...
Loading ...