Loading ...
Loading ...
Loading ...
Diagnostics Operations Navigation
39
opens a submenu. There are 4 buttons to configure the data display
mode, and one Help button on the right that you can tap for additional
information.
Each parameter item displays the selected mode independently.
Analog Gauge Mode – displays the parameters in form of an analog
meter graph
Text Mode – this is the default mode which displays the parameters in
texts and shows in list format
NOTE: Reading of status parameters, such as a switch reading, which
are mostly in word form, like ON, OFF, ACTIVE, and ABORT, etc., can
only be displayed in Text Mode. Whereas reading of value parameters,
such as a sensor reading, can be displayed in text mode and other graph
modes.
Waveform Graph Mode – displays the parameters in waveform graphs
When this mode is applied, three control buttons will appear on the right
side of the parameter item, allowing you to manipulate the display status.
⚫ Text Button – resumes Text Display Mode
⚫ Scale Button – changes the scale values, which are displayed
below the waveform graph. There are 4 scales available: x1, x2, x4
and x8.
⚫ Zoom-in Button – taps once to display the selected data graph in
full screen
Digital Gauge Mode – displays the parameters in form of a digital gauge
graph
Full Screen Display – this option is only available in the waveform graph
mode, and mostly used in Graph Merge status for data comparison.
There are three control buttons available on the top right side of the
screen under this mode.
⚫ Edit Button – tapping this button opens an edit window, on which
you can set the waveform color and the line thickness displayed for
the selected parameter item.
⚫ Scale Button – changes the scale values, which are displayed
below the waveform graph. There are 4 scales available: x1, x2, x4
and x8.
Loading ...
Loading ...
Loading ...