Loading ...
Loading ...
Loading ...
Selecting and Attentioning Channels 104
Selecting/Attentioning Multiple Channels (Multi-Select)
Multi-Select lets you select or attention multiple channels in order to apply an action to them in one step, such as adjusting multiple
channel’s High-Pass Filters, turning Aux sends on or off for multiple channels, or assigning multiple channels to a bus. You can
multi-select channels using
Select or Attention.
When you multi-select using Select, you can adjust parameters for all selected channels using the associated CKM. When you
multi-select using Attention, you can adjust parameters for all attentioned channels using the controls on the external screen.
Mutli-Selecting Using Select
Multi-selecting using Select is “local”–only channels on the same fader bank can be multi-selected using Select.
To multi-select channels using the Select switch:
1 Bank to the desired channels.
2 Do either of the following:
• Press and hold the Multi-Select switch at the top-left of the MLM, then press the Select switch on each channel you want
to include in the selection.
• Hold down the Select switch on the first channel, then press the Select switch on each channel you want to include in the
selection.
3 If you used Multi-Select, release the Multi-Select switch. The flashing Multi-Select switch flashes to indicate Multi–Select
mode is enabled.
4 Press a Channel Control Function switch to target those parameters to the associated CKM encoders.
5 Adjust a parameter on the CKM. The operation is applied to all selected channels.
6 To exit Multi-Select mode, do any of the following:
• Select an unselected channel on the same fader bank.
• Bank to a different set of channels.
Multi-Select switch
You can also use the Shift key on the keyboard to select multiple channels.
VENUE | S6L
Home Config
Recall
Store
Y
X
AFL
Dim
In
Sel
SNAPSHOTS
Talk
Back
Multi
Select
Multi
Assgn
Default Fine
OK Cancel
Over
Write
Mix to
Mon
Solo
Clear
Preview
ASSIGNABLE ENCODER MONITORING
Push A/BHold SIP
SHIFT
ALT
CTRL
ESC
A
B
0.0
001/011
reset all inputs
0.0
CH 1
S1Cu2
001 3
P:S1C1
N:S1C3
S1Cu3
S1Cu2
Loading ...
Loading ...
Loading ...