Loading ...
Loading ...
Loading ...
73
Problem
Probable causes
What to do
If there is a Power Failure,
can I still use the cooktop
burners?
Power outage in your area.
The cooktop burners can still be used. To light them:
1.Holding a lighted match to the flame spreader, push
in on the control knob and turn counterclockwise to
LITE.
2.When the flame is burning all the way around the
burner, you may adjust the heat.
If the flame is blown out during a power failure, turn
the knob immediately to OFF, as the burner will not
automatically relight, and gas may escape.
Problem
Possible causes
What to do
Oven
The oven doesn’t work (no
heating).
No power supply (oven light
and halos do not come on
either).
No gas supply (gas ovens).
Check that the circuit breaker hasn’t tripped and there
is no power outage in your area. If there is a power
outage, you cannot use the oven until power has been
restored.
The supply to the house may not be working or there
may be an outage. Contact your local gas supplier.
One of the oven lights does
not come on, but the oven
works.
The light bulb is loose.
The light bulb has blown.
If the bulb is loose, tighten it
If the bulb has blown, replace it according to the
instructions in section “Replace Oven Light Bulb”
Condensation around oven
(e.g. on control panel or
top of oven door.)
Food has high moisture
content or local climate
(temperature, humidity) is
contributing to condensation.
Condensation is normal. You can wipe the drops off
the control panel. If there is frequent or excessive
condensation, make sure that cabinetry around the
range is moisture-proofed.
Steam coming from oven
vents at the back of the
range.
Moisture from food
evaporating during cooking.
This is normal, especially if you are cooking large
quantities of food in the oven using a CONVECTION
mode.
Loading ...
Loading ...
Loading ...