Loading ...
Loading ...
Loading ...
Before using for the first time
22
Settings for compartment
The UltraPhase2 values are preset in
the standard settings.
After the cartridge has been pushed in,
the display message switches to:
Agent for OK
Confirm with the OKsensor control.
Miele UltraPhase 2 OK
Confirm with the OKsensor control.
The dispensing quantity for
UltraPhase2 is preset for (hardness
level II).
Per load OK
ml45
Confirm the preset value with the
OKsensor control. If you want to
change this value, use the
sensor controls and confirm with
the OK sensor control.
UltraPhase2
Hardness level I 36ml
Hardness level II 45ml
Hardness level III 54ml
The following appears in the display:
Insert
Remove the cover cap from the
UltraPhase2 detergent cartridge in-
cluded with the delivery.
Push the UltraPhase2 detergent
cartridge into compartment2 until it
locks into position.
When the cartridge is pushed in, the
message in the display changes to:
“TwinDos” is set. Can be changed in “Set-
tings”.
Confirm with the OKsensor control.
Close the TwinDos access panel.
Loading ...
Loading ...
Loading ...