Loading ...
Loading ...
Loading ...
Operating the washing machine
15
gsensor control
You can view information about the
energy and water consumption of
your washing machine with the
sensor.
See “Washing environmentally and
economically, Feedback” for more
information.
The following information will appear
in the display:
– An estimate of the energy and wa-
ter consumption before the pro-
gramme begins.
– The actual energy and water con-
sumption and the cost during the
programme or at the end of the
programme.
hsensor
You can specify the level of soiling of
the load in three settings. This
sensor is only active with the
TwinDos option activated.
iStart/Add laundrysensor control
The programme can be started
as soon as the sensor control
is flashing on and off. Touching
theStart/Add laundry sensor
control starts the selected pro-
gramme. The sensor control
lights up constantly.
Once the programme has been
started, theStart/Add laundry
sensor control allows you to
add laundry.
jsensor
This sensor is used for activating
Cap dispensing.
kTwinDos sensor control with the
additional Whites and Colours
sensor controls
The TwinDos sensor control is used
for deactivating and activating auto-
matic detergent dispensing. De-
pending on the colour mix of your
load, you can control the detergent
combination by selecting the Whites
or Colours sensor control.
Further information can be found in
“TwinDos”.
lOptical interface
This is used by the Service depart-
ment as a transmission point.
mProgramme selector
for selecting programmes and for
switching off the appliance. The
washing machine is switched on
when you select a programme, and
switched off by turning the pro-
gramme selector to the position.
Loading ...
Loading ...
Loading ...