Loading ...
Loading ...
Loading ...
Before using for the first time
20
3. Remove the transit bars
Damage resulting from failure to
remove the transit bars.
Failure to remove the transit bars can
result in damage to the washing ma-
chine and to adjacent cabinetry or
appliances.
Remove the transit bars as described
in “Installation and connection”.
The following message appears in the
display:
Remove transit bars
Confirm with the OKsensor control.
4. Commissioning TwinDos
The UltraPhase1 and UltraPhase2 val-
ues are preset in the standard settings
and only need to be confirmed.
The following message appears in the
display:
TwinDos
Confirm with the OKsensor control.
The following message appears in the
display:
Set now
To set up TwinDos now, touch the OK
sensor control.
To postpone setup until later: touch
the sensor control until the follow-
ing appears in the display: Set later
and pressOK to confirm.
Settings for compartment
The UltraPhase1 values are preset in
the standard settings.
Agent for OK
Confirm with the OKsensor control.
Miele UltraPhase 1 OK
Confirm with the OKsensor control.
The following appears in the display:
Set the dosage. Observe water hardness
levels
Confirm with the OKsensor control.
The dispensing quantity for
UltraPhase1 is preset for (hardness
level II).
Per load OK
ml58
Confirm the preset value with the
OKsensor control. If you want to
change this value, use the
sensor controls and confirm with
the OK sensor control.
UltraPhase1
Hardness level I 46ml
Hardness level II 58ml
Hardness level III 70ml
Loading ...
Loading ...
Loading ...