Loading ...
Loading ...
Loading ...
57
1. When the ABS contains air, the ABS bleeding function must be
performed to bleed the brake system to restore ABS brake
sensitivity.
2. If the ABS tablet, ABS pump, brake master cylinder, brake
cylinder, brake line, or brake fluid is replaced, the ABS bleeding
function must be performed to bleed the ABS.
3. After the oil in the brake oil tank is seriously insufficient or the
brake fluid is replaced, ABS Bleeding is also required
When performing ABS Bleeding, it is necessary to unscrew the exhaust screw of the
ABS pump.
After completing the tire pressure sensor learning, it takes a while for the fault light to
go out.
Tire pressure imbalance will also cause the tire pressure light to light up.
INJECTOR CODING
This function can write the identification code of the fuel injector into
the ECU so that the ECU can recognize and work normally. Write
injector actual code or rewrite code in the ECU to the injector code
of the corresponding cylinder so as to more accurately control or
correct cylinder injection quantity.
After the ECU or injector is replaced, injector code of each cylinder
must be confirmed or re-coded so that the cylinder can better
identify injectors to accurately control fuel injection.
After cleaning, generally there is no need to do the coding matching function.
The identification of the fuel injector includes its working accuracy value and type value.
When replacing it, you need to find the corresponding model for replacement.
Loading ...
Loading ...
Loading ...