Loading ...
Loading ...
Loading ...
12
CONNECT TO EEPROM ADAPTER
To read EEPROM chips using the EEPROM Adapter, please follow
the steps below.
1. Unweld the EEPROM chip from the module.
2. Install (or weld) it onto the EEPROM board according to the
chip type.
There are 3 rows on the board and each row represents a type of EEPROM
chip, so please recognize the chip you are using first and install it onto the
right side of the board.
3. Connect the board to the 14pin port of the EEPROM Adapter.
4. Connect the other side of the adapter to the main cable and
connect the cable to the device.
If the OBD2 connector is installed on the main cable, you need to take it
out first in order to connect to the EEPROM Adapter.
Loading ...
Loading ...
Loading ...