Loading ...
Loading ...
Loading ...
32
mance.
• Be careful that water does not
enter the master cylinder when
relling. Water will signicantly
lower the boiling point of the uid
and may result in vapor lock.
• Brake uid may deteriorate pain-
ted surfaces or plastic parts. Al-
ways clean up spilled uid imme-
diately.
• As the brake pads wear, it is nor-
mal for the brake uid level to
gradually go down. However, if
the brake uid level goes down
suddenly, have a dealer check.
Changing the brake uid
!
WARNING
Have a dealer change the brake uid
at the intervals specied in the NOTE
after the periodic maintenance and
lubrication chart.
CABLES
The operation of all control cables and
the condition of the cables should be
checked before each ride, and the
cables and cable ends should be lub-
ricated if necessary. If a cable is dama-
ged or does not move smoothly, have
a dealer check or replace it.
!
WARNING
Damage to the outer housing of
cables may result in internal rusting
and cause interference with cable
movement.
Replace damaged cables as soon
as possible to prevent unsafe con-
ditions.
THROTTLE GRIP AND CABLE
The operation of the throttle grip should
be checked before each ride. In addi-
tion, the cable should be lubricated at
the intervals specied in the periodic
maintenance chart.
LUBRICATING THE BRAKE LEVER
AND BRAKE PEDAL
The pivoting points of the brake lever
and brake pedal must be lubricated at
the intervals specied in the periodic
maintenance and lubrication chart.
SIDE STAND / MAIN STAND
CAUTION
The operation of the side stand / main
stand should be checked before each
ride, and the pivots and metal-to-metal
contact surfaces should be lubricated if
necessary.
!
WARNING
If the side stand / main stand does
not move up and down smoothly,
have a dealer check or repair it.
FRONT FORK
The condition and operation of the front
fork must be checked as follows at the
intervals specied in the periodic main-
tenance and lubrication chart.
PERIODIC MAINTENANCE AND MINOR REPAIR
Loading ...
Loading ...
Loading ...