Loading ...
Loading ...
Loading ...
24
riod. The mechanisms of the mobi-
le parts are mutually hardened and
adapted.
• After better run-in is obtained not by
riding slowly but softly and careful-
ly. During this period, it is advisable
to ride the vehicle at ¾ of maximum
performance. In the event that full
acceleration is necessary (overta-
king maneuvers, steep slopes, etc.)
try to limit the time to a minimum.
• Gearbox oil must be changed once
the rst 1000 km are covered. Use
the recommended oil type and spe-
cied quantity only.
The durability and the efciency of your
scooter depend strongly on the care
received during the run-in period. The
mechanisms of the mobile parts are
mutually hardened and adapted.
After better run-in is obtained not by ri-
ding slowly but softly and carefully. Du-
ring this period, it is advisable to ride
the vehicle at 3/4 of maximum perfor-
mance. In the event that full accelera-
tion is necessary (overtaking maneu-
vers, steep slopes, etc.) try to limit the
time to a minimum.
Gearbox oil must be changed once
the rst 1000 km are covered. Use the
recommended oil type and specied
quantity only.
To obtain optimum adjustment of mo-
bile parts, a long life and better perfor-
mance, it is necessary not to force the
vehicle during the 1000 km.
The vehicle must have a suitable run-in
period, during which the following pre-
cautions must be considered:
• After starting the engine, warm it up
progressively, without maximum ac-
celeration (we recommend not to ex-
ceed 3/4 of the throttle grip opening
for 1st gear) or overcharge.
• In long stretches, do not use full
speed consistently and varies the
speed repeatedly.
• When facing steep slopes, downshift
to have better power.
• After a long run do not stop the en-
gine suddenly, leave it running at
minimum acceleration for some se-
conds.
• Check the non-existence of oil, fuel
or brake liquid leaks.
• In case of anomalous noise, try to
identify its cause immediately.
OPERATION AND IMPORTANT RIDING POINTS
Loading ...
Loading ...
Loading ...