Loading ...
Loading ...
Loading ...
Operating Instructions
WARNING
DO NOT operate dryer without lint filter in
place.
STEPS TIPS IMPORTANT
1. Prepare
load for
drying.
• Dry items of similar fabric, weight and construction
in the same load.
• Separate dark items from light-colored items.
Separate items that shed lint from those that at-
tract lint.
• Check for stains which may not have been re-
moved in washing. Repeat stain removal process
and wash again before drying. Dryer heat may per-
manently set some stains.
• Place delicate, rubber coated, or small items in a
mesh bag (not included).
• Be sure buckles, buttons and trim are heatproof
and won’t damage the drum finish. Close zippers;
fasten hooks and loop fasteners. Tie strings and
sashes to prevent snagging and tangling.
2. Check that
the lint filter
is clean,
the water
container is
empty, and
both are in
place.
DO NOT operate
dryer without lint filter
in place.
3. Load the
dryer and
close the
door.
• Load items loosely. The average wet load will fill the
drum 1/3 to 1/2 full. Items need room to tumble
freely for even drying and less wrinkling.
• When drying large items, dry only two or three
items at a time. Fill out the load with smaller items.
• For delicate or very small loads, add two or three
similar items to improve tumbling action.
DO NOT overload
the dryer. To save
energy, time and
avoid uneven drying
and wrinkling avoid
overloading the dryer.
Fabric softener
sheets are NOT
recommended with
this condensing
dryer.
Operating Your Dryer
WARNING
Clean the lint filter and empty the water
container after every load.
WARNING
To reduce the risk of fire, electric shock or injury to persons, read the IMPORTANT SAFETY
INSTRUCTIONS in this
Use & Care Guide
before operating your dryer.
7
Loading ...
Loading ...
Loading ...