Loading ...
Loading ...
Loading ...
8
MAINTENANCE & CARE
General cleaning will help prolong the life and performance of your treadmill. Keep the unit clean and
maintained by dusting the components on a regular basis. Clean both sides of the Running Belt (No.
17) to prevent dust from accumulating underneath the Running Belt (No. 17). Keep your running shoes
clean so that dirt from your shoes does not wear out the Running Board (No. 16) and Running Belt
(No. 17). Clean the surface of the Running Belt (No. 17) with a clean damp cloth.
To better maintain the treadmill and prolong its life it is suggested that the machine be powered off for
10 minutes every 2 hours and fully powered off whenever not in use.
A loose Running Belt (No. 17) will result in the runner sliding off when running, while too tight of a
Running Belt (No. 17) will negatively affect the motor’s performance and also create more friction
between the roller and Running Belt (No. 17). The most suitable tightness for the Running Belt (No.
17) is pulled out 50-75mm from the Running Board (No. 16).
CENTERING THE RUNNING BELT:
Place the treadmill on level ground and set it at 3-5mph to check if the Running Belt (No. 17) drifts.
1. If the Running Belt (No. 17) moves
to the right, turn the adjusting bolt on
the right side ¼ turn clockwise, then
turn the left adjustment bolt ¼ turn
counter-clockwise. If the Running
Belt (No. 17) does not move, keep
adjusting ¼ turn at a time until it
centers. Refer to Fig. A.
2. If the Running Belt (No. 17) moves
to the left, turn the adjusting bolts on
the left side ¼ of a turn clockwise,
then turn the right adjustment bolt ¼
turn counter-clockwise. If the
Running Belt (No. 17) does not move,
keep adjusting ¼ turn at a time until it
centers. Refer to Fig. B.
3. Over time the Running Belt (No.17)
will loosen. To tighten the belt turn the
Left &Right side adjustment bolts one
full turn clockwise, check the tension of
the Running Belt (No. 17). Continue
this process until Running Belt (No.
17) is at the correct tension. Make sure
to adjust both sides equally to ensure
correct Running Belt (No. 17)
alignment. Refer to Fig. C.
Fig.A
Fig. B
Fig. C
Loading ...
Loading ...
Loading ...