Loading ...
Loading ...
Loading ...
15
pause the motor, and “PAUSE” will show on the display. Time, distance and calorie data will be
automatically saved. The speed will go to zero. Press “PAUSE/ STOP” again to stop the motor, and
all date will be cleared.
If you press “START” within 5 minutes, the data of time, distance and calorie will be accumulated,
and the starting speed will be the same as previous speed prior to pressing “PAUSE”.
“PAUSE” function lasts for about 5 minutes. If you do not press “START” again, the data will
automatically clear.
c. “PROG” is for program key. In standby mode, press the key to select manual mode “0.0” to “P1-P12”,
“U1-U3”, “3HRC” or FAT different programs. Manual mode is the default mode, the default speed is
0.5 MPH, the max operating speed is 7.5 MPH.
d. “MODE” is for mode key. In standby mode, press the key to loop set H-1 to H-3 different countdown
modes. H-1 is time countdown mode, H-2 is distance countdown mode and H-3 is calorie countdown
mode. All mode parameter can be set by “SPEED +/-”, then press “START” to start the treadmill.
e. “SPEED+/-” are for speed accelerating and decelerating keys. Press to adjust the treadmill speed
setting. When the treadmill is running, they are used to adjust the speed for 0.1 mile/time increment;
after holding for more than 2s, automatic continuous acceleration and deceleration will be realized.
f. Speed shortcut keys: 2/3/4MPH and 5/6/7MPH. Press any speed shortcut keys when the treadmill
is running.
KILOMETERS OR MILES
When the safety key is removed, press “PROG” and “MODE” for 5 seconds to change from miles to
kilometers. Display “12.0” means metric systems when display “7.5” means imperial systems.
DISPLAY FUNCTION
Speed display: Display the current running speed.
Time display: Display the running time in manual mode and display the countdown time in the time
countdown mode or in program mode.
Steps/Distance/Calorie display: Display the current running Steps. (Note：Running steps valid in
users when speed less than 2.0 MPH or more than 10.0 MPH, due to differences in user's weight and
step rate.) Display the accumulated distance in manual mode or program mode or the countdown
distance in distance countdown mode. Display the current calories.
Heart rate display: Detect heat rate signals and display the pulse value.
Data display range of various parameters:
TIME: 0:00 – 99.59 (MIN)
DISTANCE: 0.00 – 99.9 (MILE)
CALORIES: 0.0 – 999 (KCal)
SPEED: 0.5 – 7.5 (MPH)
PULSE: 50 – 200 (BPM)
HEART RATE MEASUREMENT FUNCTION
While the treadmill is on, hold the pulse sensor for 5 seconds and the heart rate value will be displayed.
The initial value is the actually measured heart rate and the display range is 50-200 BPM. In the
heartbeat measurement process, there will be a heart shaped icon flashing. Heart rate displayed is for
reference only and cannot be used as medical data.
Loading ...
Loading ...
Loading ...