Loading ...
Loading ...
Loading ...
uuHonda Sensing®uLow Speed Braking Control
*
562
Driving
The Low Speed Braking Control provides a visual and audible alert when the vehicle
is moving between approximately 1 and 6 mph (2 and 10 km/h) and there is the
possibility of a collision with a detected wall or other obstacles, as well as providing
assistance with braking.
If the only rear sensors are turned off using the parking sensor system, the Low
Speed Braking Control will not work when reversing.
2 Turning off All Rear Sensors P. 665
■
How the System Works
1Low Speed Braking Control
*
For directions on the proper handling of the sonar
sensors, please refer to the following page.
2 Sonar Sensors
*
P. 644
The vehicle will release the brake a few seconds after
the system is activated. Keep the brake pedal
depressed.
When the system activates, the engine may stop
automatically. Start the engine by normal operation if
the engine stops.
2 Starting the Engine P. 481
In order to prevent the system from activating when
not needed, always turn it off during vehicle
maintenance, when loading on ships, trucks, and so
on, or when using a chassis dynamometer, free
rollers for inspection or when washing the car in
conveyor type car wash machine.
If you put any accessories (such as a bicycle rack) on
or around the rear sensors, the Low Speed Braking
Control System may activate if it detects these
accessories as an obstacle. In this case, turn off the
rear sensor.
2 Turning off All Rear Sensors P. 665
Audible Alert
Beep Beep
The vehicle
applies brake
Driver
depresses
brake
pedal
Remove
brake after
maintaining
stationary
position
Stop
* Not available on all models
24 CIVIC HATCHBACK TYPE R-31T406200.book 562 ページ ２０２３年５月１１日 木曜日 午後６時５９分
Loading ...
Loading ...
Loading ...