Loading ...
Loading ...
Loading ...
6
to where the impact point falls on the target (for example, if test shots are hitting low, adjust elevation “down”). The
adjustments on your riflescope model are marked in MOA (minutes of arc), and the point of impact at 100 yards will
change by 1/4 MOA for each click of the windage or elevation adjustment. One full revolution of the adjustment=15
MOA.
3. When the impact on the 100-yard target is satisfactory, switch to a target set at the desired distance for final zeroing.
Set the magnification to the desired power on variable power models.
CARING FOR YOUR RIFLESCOPE
Your scope needs very little maintenance. Exterior metal surfaces should be kept clean. A light dusting with a slightly
dampened soft cloth is enough in most cases.
Your new scope features windage and elevation turrets that are completely sealed against water intrusion. However, we
recommend that you keep the windage and elevation caps on the turrets (models with capped adjustments only), except
when making adjustments, to prevent dust and dirt from collecting in the turret area.
We also recommend that lens covers be kept in place when the scope is not being used. Lenses should be inspected
regularly and kept clean at all times. Dust, dirt, and fingerprints that collect on the lens surfaces will severely degrade
image quality, and if left unclean for long periods, the anti-reflection coating could be damaged. Although lens cleaning
is not difficult, it does require care and some patience.
• Start with a lens brush or a small, soft bristle paintbrush. Gently whisk away loose dirt particles.
• Next, use an ear syringe or bulb aspirator (available in most drug stores) to blow remaining dirt or dust from lens
surfaces.
• If further cleaning is needed, use a dry, soft lint-free cloth. Very gently wipe the lens, starting at the center using a circular
motion, then working outward to the edge.
• If this has not corrected the problem repeat the process using condensation from your breath.
DO YOU NEED TO SEND YOUR SCOPE TO US?
Before returning your scope for service, you should check the following points to make sure the problem is with the scope:
• Check the mounting system and rings for looseness or misalignment.
• Check to be sure the barrel and action are properly bedded and all receiver screws are tight.
• Check to be sure the mounting system allows sufficient clearance between the objective bell and the barrel.
• Check to be sure you are using the same type and weight ammunition that you used for sighting-in.
SKU
Mag x Obj. Diam.
Reticle
Turrets
Elev. Travel (MOA)
Travel per Revolution
(MOA)
Parallax Adjustment
Min. Parallax (Yards)
Eye Relief, Max Mag.
Field of View
@ 100 Yds (Feet)
Length (inches)
Weight (oz )
TWC3940 3-9x40 30/30 Capped 30/30 15 Fixed 100 3.0” 37.5-12.2 12.3 14.8
TWC3950
3-9x50 30/30 Capped 30/30 15 Fixed 100 3.0” 33.6-10.4 13.5 17.6
TWC41240 4-12x40 30/30 Capped 30/30 15 Fixed 100 3.0” 26-9 13.3 15.7
TWC61850 6-18x50 30/30 Capped 20/20 15 Adj Obj 100 3.7” 17.3-5.7 13.3 22.0
Technical Specications
Loading ...
Loading ...
Loading ...