Loading ...
Loading ...
Loading ...
2. Make sure that the throttle trigger is locked at the
idle position when the throttle trigger lockout is
released.
3. Push down the throttle trigger lockout and make
sure that it goes back to its initial position when you
release it.
4. Start the product. Refer to
To start the engine on
page 10
. Apply full throttle.
5. Release the throttle trigger and make sure that the
blades stop and stay stationary.
WARNING:
If the blades move
when the throttle trigger is in the idle
position, then the carburetor idle speed
must be adjusted. Refer to
To adjust the
idle speed on page 12
.
To do a check of the stop switch
1. Start the engine.
2. Move the stop switch to the stop position and make
sure that the engine stops.
To do a check of the hand guard
The hand guard prevents injuries from the blades.
1. Stop the engine.
2. Make sure that the hand guard is attached correctly.
3. Examine the hand guard for damages.
To do a check of the vibration damping system
WARNING: Use of incorrectly wound
cord or an incorrect cutting attachment
increases the level of vibration.
The vibration damping system decreases vibration in
the handles to a minimum which makes the operation
easier. The vibration damping system decreases the
vibrations between the engine unit and the shaft unit.
1. Stop the engine.
2. Do a visual check for deformation and damage, for
example cracks.
3. Make sure that the vibration damping units are
attached correctly.
6
1118 - 005 - 29.08.2023
Loading ...
Loading ...
Loading ...