Loading ...
Loading ...
Symbols on the product
WARNING: This product can be
dangerous and cause serious injury or
death to the operator or others. Be careful
and use the product correctly.
Read the operator's manual carefully
and make sure that you understand the
instructions before you use this product.
Use a protective helmet in locations where
objects can fall on you. Use approved
hearing protection. Use approved eye
protection.
Use approved protective gloves.
Use stable boots with non-slip soles.
Stop the product fully before you touch the
cutting tool.
There is no electrical insulation in this product. If the product touches or comes
near high voltage power lines, it can cause serious injury or death to the opera-
tor. Electricity can move between different objects by a curve. The highter the
voltage, the longer the electricity can move. Electricity can also move through
branches and other objects, especially if the object is wet. Always keep a dis-
tance at a minimum of 10 m/33 ft between the product and high voltage power
lines and/or objects that touches the power lines. If it is necessary to do work
near the power lines, make sure that the power is off before you start the work.
Keep a distance at a minimum of 15 m/50 ft to other persons or animals during
the operation.
yyyywwxxxx The rating plate shows serial number.
yyyy is the production year and ww is
the production week.
Note: Other symbols/decals on the product refer to
special certification requirements for some markets.
EPA III
The Emissions Compliance Period referred to on the
Emission Compliance label indicates the number of
operating hours for which the engine has been shown
to meet Federal emissions requirement. Maintenance,
replacement or repair of the emission control devices
and system may be performed by any nonroad engine
repair establishment or individual.
Product damage
We are not responsible for damages to our product if:
• the product is incorrectly repaired.
• the product is repaired with parts that are not
from the manufacturer or not approved by the
manufacturer.
• the product has an accessory that is not from the
manufacturer or not approved by the manufacturer.
• the product is not repaired at an approved service
center or by an approved authority.
Safety
Safety definitions
Warnings, cautions and notes are used to point out
specially important parts of the manual.
WARNING: Used if there is a risk of
injury or death for the operator or bystanders
if the instructions in the manual are not
obeyed.
1118 - 005 - 29.08.2023 3
Loading ...
Loading ...
Loading ...