Loading ...
Loading ...
Loading ...
38
EN
Drain hose is kinked or clogged.
•
Clean and straighten the drain hose.
The drain filter is clogged.
•
Clean the drain filter.
Ensure door is not open.
•
Close the door completely. If
is not released, call for service.
,
,
Error Messages
Symptoms Reason Solution
Water supply is not adequate in area.
•
Check another tap in the house.
Water supply taps are not completely open.
•
Fully open tap.
Water supply hose(s) are kinked.
•
Straighten hose(s).
The filter of the supply hose(s) are clogged.
•
Check the filter of the supply hose.
If water leakage occurred in the aqua stop
supply hose, indicator will become red.
May vary depending on the model.
•
Use the aqua stop supply hose.
Load is too small.
•
Add 1 or 2 similar items to help balance the
load.
Load is out of balance.
•
Add 1 or 2 similar items to help balance the
load.
The appliance has an imbalance detection
and correction system. If individual heavy
articles are loaded (e.g. bath mat, bath robe,
etc.) this system may stop spinning or even
interrupt the spin cycle altogether.
•
Rearrange load to allow proper spinning.
If the laundry is still too wet at the end of the
cycle, add smaller articles of laundry to
balance the load and repeat the spin cycle.
•
Rearrange load to allow proper spinning.
•
Your washing machine is equipped with an automatic error-monitoring system to detect and diagnose
problems at an early stage. If your washing machine does not function properly or does not function at all,
check the following before you call for service:
dE4
Door sensor has malfunctioned.
If is not released, call for service.
•
Loading ...
Loading ...
Loading ...