Loading ...
Loading ...
Loading ...
Settings
Allows you to set various options on the refrigerator
and in the application.
NOTE
If you change your wireless router, Internet
service provider, or password, delete the
registered appliance from the LG SmartThinQ
application and register it again.
Open Source Software Notice
Information
To obtain the source code under GPL, LGPL, MPL,
and other open source licenses, that is contained in
this product, please visit http://opensource.lge.com.
In addition to the source code, all referred license
terms, warranty disclaimers and copyright notices
are available for download.
LG Electronics will also provide open source code
to you on CD-ROM for a charge covering the cost
of performing such distribution (such as the cost of
media, shipping, and handling) upon email request
to [email protected]. This offer is valid for a
period of three years after our last shipment of this
product. This offer is valid to anyone in receipt of
this information.
The application is subject to change for appliance
improvement purposes without notice to users.
Functions may vary by model.
30
EN
Smart Diagnosis™ Using a
Smart Phone
For appliances with the or logo. Use this
function if you need an accurate diagnosis by an
LG Electronics customer information centre when
the appliance malfunctions or fails.
Smart Diagnosis™ can not be activated unless the
appliance is connected to power. If the appliance is
unable to turn on, then troubleshooting must be
done without using Smart Diagnosis™.
Using Smart Diagnosis™
Use this function if you need an accurate diagnosis
by an LG Electronics customer information center
when the appliance malfunctions or fails. Use this
function only to contact the service representative,
not during normal operation.
1
Press the Power button to turn on the washing
machine. Do not press any other buttons or turn
the programme selector knob.
2
When instructed to do so by the call centre, place
the mouthpiece of your phone close to the
Power button.
Max.
10 mm
3
Press and hold the Temp. button for three seconds,
while holding the phone mouthpiece to the icon or
Power button.
4
Keep the phone in place until the tone transmission
has finished. Time remaining for data transfer is
displayed.
•
For best results, do not move the phone while the
tones are being transmitted.
•
If the call centre agent is not able to get an
accurate recording of the data, you may be
asked to try again.
LG Electronics
service centre
5
Once the countdown is over and the tones have
stopped, resume your conversation with the call
centre agent, who will then be able to assist you
using the information transmitted for analysis.
Wireless WLAN Module Specifications
Model LCW-004
Frequency
Range
2412 to 2472 MHz
Output
Power(Max)
IEEE 802.11b:17.82 dBm
IEEE 802.11g:17.72 dBm
IEEE 802.11n:16.61 dBm
Download Cycle
Download new and special cycles that are not
included in the basic cycles on the appliance.
Appliances that have been successfully
registered can download a variety of specialty
cycles specific to the appliance.
Only one cycle can be stored on the appliance
at a time.
Once cycle download is completed in the
appliance, the product keeps the downloaded
cycle until a new cycle is downloaded.
Tub Clean Coach
This function shows how many cycles remain
before It is time to run the Tub Clean cycle.
Loading ...
Loading ...
Loading ...