Loading ...
Loading ...
Loading ...
connect na to AV d ic
You can view the recorded movie and photo images(SC-DXl03i DX105 only) on a large screen by connecting the DVD
camcorder to a TV,
CONNECTING TO A "IV
o To play back your recordings, the television must be NTSC compatible.
_page 102
• We recommend that you use the AC power adaptor as the power source
for the DVD camcorder.
Use the provided AV cable to connect the DVD camcorder to a TV as
follows:
1. Connect the end of the AV cable with the single plug to the AV jack of the
DVD camcorder.
2. Connect the other end with video (yellow) and left(white)/right(red) audio
cables to the TV.
DVD eamcorder TV
@@@
Signal flow
AV cable
®
• For more information about the connection, refer to your TV's user manual.
• Before connecting, make sure that the volume on TV is turned down: forgetting this may cause feedback
from the TV speakers.
° Carefully connect the input and output cables to the corresponding connections on the device the DVD
camcorder is being used with.
Viewing on "IV screen
1. Turn on the -D! and set the input selector to the Input connection the DVD camcorder is connected to.
- This is often referred to as "line." Refer to the TV instruction manual for how to switch the TV input.
2. Turn the DVD camcorder on.
- Slide the POWER switch downwards, then open the LCD screen.
- Set the appropriate storage media. (SC-DX103/DX105 only) _ page 30
- Press the MODE button to set the Play mode. _page 21
- The image from the DVD camcorder will appear on the TV screen.
3. Perform playback.
- You can perform playback, recording or make settings in the menu while viewing on your TV screen.
86_ English
Loading ...
Loading ...
Loading ...