Loading ...
Loading ...
Loading ...
23
8SGDWHVWR<RXU0DFKLQHXVLQJWKH³6FKZLQQ7RROER[´$SS
This ¿tness machine is equipped with Bluetooth® connectivity and can be wirelessly updated with the “Schwinn Toolbox´
App. Once the App is installed on your device, the App will inform you of when there is an update to your machine.
1. Download the free App, named Schwinn Toolbox™. The App is available on the App Store and Google Play™.
1RWH For a complete list of supported devices, review the App on the App Store or Google Play™.
2. Install the App.
When noti¿ed that there is an update to your ¿tness machine, follow the prompts on the App. Place the device that is run-
ning the App on the Media Tray. The App will update the software on the machine with the latest version. Do not remove
your device from the Media Tray until the update is complete. The machine will return to the Welcome Screen when the
update is completed.
:RUNRXWZLWK2WKHU)LWQHVV$SSV
This ¿tness machine has integrated Bluetooth® connectivity which allows it to work with a number of digital partners. For
our latest list of supported partners, please visit: ZZZQDXWLOXVFRPSDUWQHUV
%OXHWRRWK®+HDUW5DWH&KHVW6WUDSQRWVXSSOLHG
Your ¿tness machine is equipped to be able to receive a signal from a Bluetooth® Heart Rate Chest Strap. When connect-
ed, the Console will display the Bluetooth® Heart Rate Chest Strap Connected icon.
,I\RXKDYHDSDFHPDNHURURWKHULPSODQWHGHOHFWURQLFGHYLFHFRQVXOW\RXUGRFWRUEHIRUHXVLQJD%OXHWRRWK®
FKHVWVWUDSRURWKHU%OXHWRRWK®KHDUWUDWHPRQLWRU
1. Put on your Bluetooth® Heart Rate Chest Strap and activate it.
2. Push the Connect Bluetooth® button. The Console will actively search for any devices in the area. The Bluetooth®
Heart Rate Chest Strap Connected icon will Àash on the Console while searching.
1RWH Any previously connected Chest Straps will be disconnected. However, if they are within range, the Console
may ¿nd them again if unable to locate your Chest Strap.
3. The Bluetooth® Heart Rate Chest Strap Connected icon will stop blinking when connected. You are ready to workout.
At the end of your workout, push the Connect Bluetooth® button to disconnect your Chest Strap from the Console.
Contact Heart Rate Sensors
Contact Heart Rate (CHR) sensors send your heart rate signals to the Console. The CHR sensors are the stainless steel
parts of the Handlebars. To use, put your hands comfortably around the sensors. Be sure that your hands touch both the
top and the bottom of the sensors. Hold ¿rm, but not too tight or loose. Both hands must make contact with the sensors for
the Console to detect a pulse. After the Console detects four stable pulse signals, your initial pulse rate will be shown.
Once the Console has your initial heart rate, do not move or shift your hands for 10 to 15 seconds. The Console will now
validate the heart rate. Many factors inÀuence the ability of the sensors to detect your heart rate signal:
• Movement of the upper body muscles (including arms) produces an electrical signal (muscle artifact) that can interfere
with pulse detection. Slight hand movement while in contact with the sensors can also produce interference.
• Calluses and hand lotion may act as an insulating layer to reduce the signal strength.
Loading ...
Loading ...
Loading ...