Loading ...
Loading ...
Loading ...
Page 22
PROBLEM CAUSE SOLUTION
The router does not work
Plug is not plugged into the
power source.
Plug the detachable cord
into the power source.
Switch is in “OFF” position.
Pull the switch to “ON”
position.
The carbon brushes have
worn out completely.
Remove the brush caps,
and replace the old brushes
with new ones.
The surface of the
workpiece is not smooth
after cutting
The bit is dull. Change to a sharp bit.
Routing at an inappropriate
bit speed.
Select an appropriate bit
speed.
Bit cannot be installed
Bit size is inappropriate for
the collet/nut.
Use only 1/4” diameter bits
with the 1/4” collet; use
only 1/2” diameter bits with
the 1/2” collet.
TROUBLESHOOTING
Loading ...
Loading ...
Loading ...