Loading ...
Loading ...
Loading ...
Page 14
“LIVE TOOL INDICATOR” LIGHT
(FIG. 10)
Your router also has a “live tool indicator”
green light, located on the motor housing
top cap where the power cord enters the
motor housing. This green light is always
on when the router motor is plugged into a
power source.
FIG. 10
Live tool indicator
ELECTRONIC VARIABLE SPEED
CONTROL (FIG. 11)
The electronic speed control feature allows
the motor speed to be matched to the cutter
size and material for an improved nish and
extended bit life.
Speed changes are made starting at “1” and
rotating the speed control dial clockwise
increase the speed, and counter-clockwise
to decrease the speed as indicated on the
Dial, numbered 1 through 6.
FIG. 11
Variable-speed dial
OPERATION
NOTICE: The speed may be changed while
the router is “ON”, but do not change the
speed if the cutter bit is in the workpiece.
WARNING:
Before operating your
router, follow all safety instructions in this
manual. Failure to do so could result in
serious personal injury.
NOTICE: Choose the applicable cutting
speed according the bit diameter and the
material being cut.
EDGE ROUTING OR INTERNAL
ROUTING (FIG. 12)
For ease of operation and to maintain
proper control, your router has two handles,
one on each side of the router base. When
operating the router, always hold it rmly
with both hands (FIG. 12).
FIG. 12
Loading ...
Loading ...
Loading ...