Loading ...
Loading ...
Loading ...
19
Table 3-6 Firewall parameters description
Parameter Description
Type
Select IP Address, IP Segment, MAC Address or All IP Addresses.
IP Address: Select the IP version, and then enter the IP address to be
added.
IP Segment
: Select the IP version, and then enter the Initial IPv4
Address, and End IPv4 Address.
MAC Address: Enter the MAC address to be added.
All IP Addresses: Set all IP addresses to the allow list or block list.
All Device Ports
Set access ports. You can select all device ports, or set the port range.
All Device Ports: Set all ports of the Terminal to the block list or allow
list. When all IP addresses are set to the block list, you are not allowed
to select all ports. Because in this case, all devices cannot access all ports
of the Terminal.
Device Start Sever Port/Device End Sever Port: Set the start port and
end port. The value ranges from 1 to 65535.
Device Start Sever
Port
Device End Sever
Port
4. Click Save.
The system goes back to the Firewall web page.
Click Confirm.
3.5.3 Register
The Terminal registers to the proxy server designated by the user, and then the proxy server provides
the transfer function to facilitate the client software to access the Terminal, so as to watch live view
and monitor the scene.
Select Network > Register on the web page.
Select the Enable checkbox, and then set parameters.
Register
Table 3-7 Register parameter description
Parameter Description
IP Address
The IP address or domain name of the server that the Terminal is registered
to.
Port The sever port for registering.
Device Register ID Customize the register ID for the Terminal.
Click Save.
Loading ...
Loading ...
Loading ...