Loading ...
Loading ...
Loading ...
56V LITHIUM-ION CORDLESS CHAIN SAW — CS1610/CS1610-FC 47
PROBLEM CAUSE SOLUTION
Chain saw does
not cut properly.
◾
Insufficient chain tension.
◾
Readjust the chain tension, following
the chapter: “ADJUSTING THE
CHAIN TENSION”.
◾
Dull chain.
◾
Sharpen the chain cutters, following
the chapter: “HOW TO SHARPEN
THE CUTTERS”.
◾
Chain installed backwards.
◾
Reinstall the saw chain, following
the chapter: “REPLACING THE BAR
AND CHAIN”.
◾
Worn chain.
◾
Replace the chain, following the
chapter: “REPLACING THE BAR
AND CHAIN”.
◾
Dry or excessively stretched
chain.
◾
Check the oil level. Refill the oil tank
if necessary.
◾
Chain not in bar groove.
◾
Reinstall the saw chain, following
the chapter: “REPLACING THE BAR
AND CHAIN”.
Chain becomes
loose or drops
off the guide bar
during normal
use.
◾
The chain will become
loose as the temperature of
the chain increases during
normal saw operation.
◾
Tighten the chain tension, following
the chapter “ADJUSTING THE
CHAIN TENSION”.
◾
Chain does not engage drive
sprocket.
◾
Reinstall the saw chain, following
the chapter “REPLACING THE BAR
AND CHAIN”.
Bar and chain
running hot and
smoking.
◾
Check chain tension for over
tightened condition.
◾
Re-tension the saw chain, following
the chapter: “ADJUSTING THE
CHAIN TENSION”.
◾
Chain oil tank is empty.
◾
Fill the tank with bar and chain oil.
◾
Debris in guide bar groove.
◾
Clear the debris in the groove.
Loading ...
Loading ...
Loading ...