Loading ...
Loading ...
Loading ...
56V LITHIUM-ION CORDLESS CHAIN SAW — CS1610/CS1610-FC46
TROUBLESHOOTING
PROBLEM CAUSE SOLUTION
Motor does not
run.
◾
The battery pack is not
attached to the chain saw.
◾
Attach the battery pack to the chain
saw.
◾
There is no electrical contact
between the saw and battery.
◾
Remove the battery, check contacts
and reinstall the battery pack.
◾
The battery pack is depleted.
◾
Charge the battery pack.
◾
The battery pack or chain
saw is too hot.
◾
Allow the battery pack or chain saw
to cool until the temperature drops
below 152°F (67°C).
◾
Chain brake is engaged.
◾
Pull the chain kickback brake handle
backward toward the front handle.
◾
Debris in bar groove.
◾
Press the saw chain against the
wood, move the chain saw back and
forth to discharge the debris.
◾
Debris in side cover.
◾
Remove battery pack, then remove
side cover and clean out debris.
Chain saw stops
running during
operation
◾
The chain saw is overloaded
◾
Decrease the load
◾
The battery pack or chain
saw is too hot.
◾
Allow the battery pack or chain saw
to cool until the temperature drops
below 152°F (67°C).
◾
Saw chain is bound in the
wood.
◾
Release the variable-speed trigger
switch; remove the saw chain and
guide bar from the wood, then
restart the chain saw.
Motor runs, but
chain does not
rotate.
◾
Chain does not engage drive
sprocket.
◾
Reinstall the chain, following the
chapter “REPLACING THE BAR
AND CHAIN”. Ensure that the drive
links on the chain are fully seated
on the sprocket.
Chain brake does
not engage.
◾
Debris preventing full
movement of the chain
kickback brake handle.
◾
Clean debris from the external chain
brake mechanism.
◾
Possible chain brake
malfunction.
◾
Contact EGO Customer Service for
repair.
Loading ...
Loading ...
Loading ...