EGO CS1611 OPERATOR'S MANUAL

Loading ...

56V LITHIUM-ION CORDLESS CHAIN SAW — CS1610/CS1610-FC 37

Disassembling the Worn Bar

and Chain

1. Remove the battery. Allow the saw

to cool, then tighten the oil-tank cap

to prevent oil from spilling.

2. Position the chain saw on its side on

a ﬁrm, ﬂat surface, so that the side

cover is facing upwards (Fig. 24).

3. Wear gloves. Lift up the semicircular

tab. Grasp the tab and turn the side-cover knob counterclockwise until the side

cover can be removed (Fig. 24). Clean the side cover with a dry cloth.

4. Turn the chain-tensioning knob counterclockwise (Fig. 24). Remove the bar and

chain from the mounting surface. Remove the worn chain from the bar.

NOTICE: This is a good time to inspect the drive sprocket for excessive wear or damage.

Assembling The New Bar

and Chain

1. Lay the new saw chain in a loop on

a ﬂat surface and straighten any

kinks (Fig. 25).

2. Place the chain drive links into the

guide bar groove. Position the chain

so there is a loop at the back of the

guide bar (Fig. 26).

3. Hold the chain in position on the

guide bar and place the loop around

the sprocket of the power head.

Chain-Tensioning Knob

Side Cover Knob

Front Handle

Side Cover

Guide Bar Groove

Chain Drive

Links

Loading ...

EGO CS1611 - POWER+ 16" Chain Saw 40cc