Loading ...
Loading ...
Loading ...
56V LITHIUM-ION CORDLESS CHAIN SAW — CS1610/CS1610-FC36
MAINTENANCE
WARNING:
When servicing, use only identical replacement parts. Use of any other
parts may create a hazard or cause product damage.
WARNING:
Always wear safety goggles or safety glasses with side shields during
power tool operation or when blowing dust. If the operation is dusty, also wear a dust
mask.
WARNING:
To avoid serious personal injury, remove the battery pack from the
chain saw before inspecting, cleaning, or performing maintenance. A battery operated tool
with the battery pack inserted is always on and can start accidentally.
WARNING:
When cleaning the chain saw, DO NOT immerse in water or other liquids.
WARNING:
Do not at any time let brake fluids, gasoline, petroleum-based
products, penetrating oils, etc. come in contact with plastic parts. Chemicals can damage,
weaken, or destroy plastic, which may result in serious personal injury.
CLEANING
◾
After each use, clean debris from the chain and guide bar with a soft brush. Wipe
the chain saw surface with a clean cloth moistened with a mild soap solution.
◾
Remove the side cover, and then use a soft brush to remove debris from the guide
bar, saw chain, sprocket, and side cover.
◾
Always clean out wood chips, saw dust, and dirt from the guide bar groove when
replacing the saw chain.
REPLACING THE BAR AND CHAIN
WARNING:
Never touch or adjust the chain while the motor is running. The saw
chain is very sharp. Always wear protective gloves when performing maintenance to the
chain.
NOTICE: When replacing the guide bar and chain, always use the specified bar and
chain combination listed in the section: “Recommended Bar and Chain for this Chain
Saw”.
Loading ...
Loading ...
Loading ...