Loading ...
Loading ...
Loading ...
Fig. 1
(1)
Top cupboard* (B) Door depth*
(2) Appliance* (C) Ventilation cross-
section*
(3) Kitchen cabinet* (D) Distance to the rear of
the appliance*
(4) Wall* (E) Distance to the side of
the appliance*
(A) Appliance depth*
Set up the appliance directly next to the kitchen
cabinet Fig. 1 (3).*
There must be a ventilation shaft at the depth Fig. 1 (D)
of the back of the top cupboard over the entire width
of the top cupboard.*
The cross section of the ventilation gap Fig. 1 (C) must
be maintained below the ceiling.*
If the appliance is installed with the hinges next to a
wall Fig. 1 (4), the distance between the appliance and
the wall must be at least 13 mm (0.51 in).*
If the appliance is installed with the hinges next to a
wall Fig. 1 (4), the distance between the appliance and
the wall must be at least 20 mm (0.79 in).*
In order to be able to fully open the door, the appliance
must protrude by the depth Fig. 1 (B) of the door from
the front of the kitchen cabinet. Regardless of the
depth of the kitchen cabinets Fig. 1 (3) and use of wall
spaces, the appliance can protrude further.*
A*
B* C* D* E*
675 mm
26.57 in
x
75 mm
2.95 in
Min.
300 cm
2
(46.5 in
2
)
Min.
50 mm
(1.97 in)
Min.
13 mm
(0.51 in)
Appliances without handle / with recessed grip
A* B* C* D* E*
682 mm
26.85 in
x
82 mm
3.23 in
Min.
300 cm
2
(46.5 in
2
)
Min.
50 mm
(1.97 in)
Min.
20 mm
(0.79 in)
Appliances with recessed grip and glass/stone front
Fig. 2
(1)
Top cabinet* (B) Door depth*
(2) Appliance* (C) Ventilation cross-
section*
(3) Kitchen cabinet* (D) Distance to the rear of
the appliance*
(4) Wall* (E) Distance to the side of
the appliance*
(A) Appliance depth*
Set up the appliance directly next to the kitchen
cabinet Fig. 2 (3).*
There must be a ventilation shaft at the depth Fig. 2 (D)
of the back of the top cupboard over the entire width
of the top cupboard.*
The cross section of the ventilation gap Fig. 2 (C) must
be maintained below the ceiling.*
Setup conditions
4 * Depending on model and options
Loading ...
Loading ...
Loading ...