Loading ...
Loading ...
Loading ...
13.15 Fit the bottom soft stop mecha‐
nism
Fig. 43 *
u
Insert the adapter on the handle side in the recess.
Fig. 43 (1)*
u
Tighten the screws using the T15 screwdriver.
Fig. 43 (2)*
Fig. 44
u
Slide the soft stop mechanism on the bearing
bracket side at an angle into the recess as far as it
will go. Fig. 44 (1)
u
Slide the soft stop mechanism fully into the recess.
Fig. 44 (2)
w
The unit is positioned correctly when the rib on the
soft stop mechanism is in the guide.
u
Tighten the screw using a T15 screwdriver. Fig. 44 (3)
u
Push the cover over the hinge. Fig. 44 (4)
Fig. 45
The door is open 90°.
u
Turn the hinge in the mount. Fig. 45 (1)
u
Insert the bolt with a T15 screwdriver in the mount
and hinge. Make sure that the latching lug is sitting
correctly in the groove. Fig. 45 (2)
u
Push the bearing bracket cover along the hinge and
fit it on the mount. Fig. 45 (3)
u
Remove the locking device. Fig. 45 (4)
u
Position the panel on the handle side and swing it in.
Fig. 45 (5)
w
The panel is clicked into place.
u
Close the bottom door.
13.16 Fitting the top soft stop mecha‐
nism
Fig. 46 *
u
Insert the adapter on the handle side in the recess.
Fig. 46 (1)*
u
Tighten the screws using the T15 screwdriver.
Fig. 46 (2)*
Reversing the door
* Depending on model and options 21
Loading ...
Loading ...
Loading ...