Loading ...
Loading ...
Loading ...
13
FINAL INSTALLATION
3. Partially insert three blade screws (BB), along with
three blade washers (CC) through one blade (L) and
into one blade arm (K). Tighten each blade screw
(BB) with a Phillips screwdriver (not included), starting
with the one in the middle. Repeat this step for the
remaining blades (L) and blade arms (K).
Hardware Used
BB
Blade Screw x 15
CC
Blade Washer x 15
4. Insert blade arm (K) through slot in the side of the
motor assembly (H). Align the holes of one blade
arm (K) with two motor screw holes in underside
of the motor assembly (H). Secure with two motor
screws (XX). Repeat this step for the remaining
blade arms (K).
Hardware Used
XX
Motor Screw x 10
5. Remove one of the four adapter plate screws (S)
located on the underside of the motor assembly (H)
and loosen the other three screws. Align the key
slots of the light pan (N) with the loosened adapter
plate screws (S) and turn the light pan (N) clockwise.
Replace previously removed adapter plate screw (S),
then tighten all screws.
BB
CC
K
L
K
XX
H
S
N
H
4
5
3
Slot
Loading ...
Loading ...
Loading ...