Loading ...
Loading ...
Loading ...
Chapter 7
56
The indicators show that error 1 has
occurred. (continued)
If error 1 persists, check for the following:
- Make sure your media is longer than 39.37" (1 m).
- Make sure the file formats are compatible.
When sending a template as a BLF file, an error is indicated
if the model name in the file is different to the model name
of the printer receiving the file.
When trying to print a template, an error is displayed if the
specified template does not exist.
LED indicators shows an error if the search for a template
with a linked database fails.
LED indicators shows an error if the transferred, data
causes the capacity of the user storage area to be
exceeded.
If you get such errors, turn the printer off, and then turn it on
again.
If error 1 is not cleared, contact Brother Customer Service.
The indicators show that error 2 has
occurred.
Is the connected device supported by the USB port?
An overcurrent or unsupported device was detected by the
USB port. Turn the printer off, and then check the
connected device.
If a USB hub is connected, the printer will automatically turn
off after a certain length of time has passed.
Is the printer in mass storage mode?
An error is displayed if the file system becomes corrupted
or a file is copied while a mass storage file is being
processed. Turn the printer off.
Has the wireless LAN or Bluetooth connection been
interrupted? (TD-2125NWB/2135NWB only).
The wireless LAN or Bluetooth connection established
while the printer is on was interrupted. Turn the printer off,
and then turn it on again.
Problem Solution
Loading ...
Loading ...
Loading ...