Tesla Technology RH2950M1 Horizontal freezers

User manual - Page 7

For RH2950M1.

PDF File Manual, 48 pages, Read Online | Download pdf file

RH2950M1 photo
Loading ...
Loading ...
Loading ...
7
ENG
Dusts behind the freezer and on the ground shall be timely cleaned to improve the cooling effect and
energy saving. The interior of the freezer should be cleaned regularly to avoid odor. Soft towels or
sponge dipped in water and non-corrosive neutral detergents are suggested for cleaning. The freezer
of shall be finally cleaned with clean water and dry cloth. Open the door for natural drying before the
power is turned on.
Do not use hard brushes, clean steel balls, wire brushes, abrasives, such as toothpastes, organic
solvents (such as alcohol, acetone, banana oil, etc.), boiling water, acid or alkaline items clean freezer
considering that this may damage the fridge surface and interior.
Do not rinse with water so as not to affect the electrical insulation properties. Please use a dry cloth
when cleaning temperature control knob and electrical components.
Freezer shall be manually defrosted.
Unplug the freezer and open the freezer door, remove foods and shelving basket before defrosting;
Open the outflow hole and drainage hole (and place water container at the outflow hole);
indoor frost will naturally melt, wipe the defrost water with a dry, soft cloth. When the frost softens, an ice
scraper might be used to the accelerate de-icing process.
Please remove the food and put in a cool place when defrosting before removing accessories.
Foods can be preserved for a couple of hours even in summer in case of power failure; it is recommended
to reduce the frequency of opening door and do not put fresh foods into the freezer. Please unplug the
freezer left unused for a long time for cleaning. Keep the door open to avoid the bad odor.
Do not turn upside or vibrate the freezer, the carrying angle can not be greater than 45°. Do not hold the
door and hinge when moving this unit.
MAINTENANCE OF FREEZER
Cleaning
Defrost
Stop using
Please unplug the freezer for defrost and cleaning.
Other mechanical devices or other means shall not be used to accelerate except those
recommended by the manufacturer. Do not damage the refrigerant circuit.
Continuous operation is recommended when the freezer is started. Please do not stop the
freezer under normal circumstances so as not to affect the freezer’s service life.
TROUBLESHOOTING
The following simple issues can be handled by the user. Please call the after-sale service department if the
issues are not settled.
Device is not working
Chech whether the freezer is plugged in and has power.
Low voltage.
Whether temperature control knob is in the work area.
Failure power or tripping circuit.
Loading ...
Loading ...
Loading ...