Warmlite WL45033N Hingham Wall Mounted Fireplace Suite

INSTRUCTION MANUAL - Page 12

For WL45033N.

PDF File Manual, 16 pages, Read Online | Download pdf file

WL45033N photo
Loading ...
Loading ...
Loading ...
12 CUSTOMER SUPPORT TEAM:: +44 (0) 333 220 6056
TURNING THE LAMPS ON AND OFF
Aside from the ame eect, the small lamps to
either side of the unit can also be turned on or
o as required.
Press the ‘Light’ button on the unit’s
remote control while the re is turned on
to turn these lamps on. Press this button
again while the lamps are on to turn them
o.
SETTING THE TIME AND DATE
This unit is equipped with a built-in timer, which
allows for programmable, hands-free timed
operation. To make use of the unit’s timer,
begin by setting the correct time and date.
Press the ‘Time’ button on the unit’s
control panel to begin selecting and
adjusting the time and date. Press this
button once to select the day of the week,
press it again to select the hour, and press
it a third time to select the minutes.
The corresponding indicators or digits on
the LCD control panel will ash to indicate
they have been selected and can now be
adjusted.
When each setting has been selected,
press the Up and Down arrows on the
unit’s remote control to manually adjust it.
Press the ‘Time’ button again once the
correct date or time has been set to move
on to the next setting. Press this button
again once all the settings have been
adjusted to exit the time and date function
and return to normal operation.
The unit will automatically save the
selected settings to memory.
SETTING THE TIMER
Note: Ensure the correct time and date have
been set before attempting to program a timer.
Press the ‘Timer Set’ button on the unit’s
remote control to begin setting a timer.
Press this button once to select the
starting day for the timer, press it again
to select the starting hour, press it a
third time to select the starting minutes,
a fourth time to select your desired
temperature and a fth time to set the
starting day. The corresponding indicators
or digits on the LCD control panel will
ash to indicate they have been selected
and can now be adjusted.
When each setting has been selected,
press the Up and Down arrows on the
unit’s remote control to manually adjust it.
Press the ‘Timer Set’ button again once
each setting has been adjusted to move
on to the next one.
Note: When selecting the starting or ending
day for each timer, press the Down arrow once
the correct day has been chosen to conrm
the selection. Failing to do this will result in the
timer not being properly saved to memory or
activated.
Press the ‘Timer Set’ button again once all
the settings have been adjusted to move
on to the ending date and time selection.
Repeat the process as detailed above to
set the ending time, date and temperature
for the currently selected timer.
Press the ‘Timer Set’ button again once all
the settings have been adjusted to exit the
timer programming function. The unit will
automatically save the selected settings
to memory.
TURNING THE TIMER ON AND OFF
A previously programmed timer can be
turned on or o at any point using the
unit’s remote control.
Press the ‘Timer’ button on the remote
control to turn a pre-programmed timer
on. Press this button again when a timer
is active to turn this setting o.
Note: If the ‘Down’ arrow has not been
pressed when selecting the date, as detailed
above, this button will have no function. Ensure
the starting and ending dates for each timer
have been correctly set and saved before
attempting to use this function.
Loading ...
Loading ...
Loading ...