Loading ...
Loading ...
Loading ...
User’s Manual
13
8 Configuration
You can view and edit general information of the dual-tech detector.
8.1 Viewing Status
On the hub screen, select a dual-tech detector from the peripheral list, and then you can view the
status of the dual-tech detector.
Table 8-1 Status
Parameter Value
Temporary Deactivate
The status for whether the functions of the dual-tech detector are
enabled or disabled.
●
: Enable.
●
: Only disable tamper alarm.
●
: Disable.
Temperature The temperature of the environment.
Signal Strength
The signal strength between the hub and the dual-tech detector.
●
: Low.
●
: Weak.
●
: Good.
●
: Excellent.
●
: No.
Battery Level
The battery level of the dual-tech detector.
●
: Fully charged.
●
: Sufficient.
●
: Moderate.
●
: Insufficient.
●
: Low.
Tamper Status
The tamper status of the dual-tech detector, which reacts to the
detachment of the body.
Online Status
Online and offline status of the dual-tech detector.
●
: Online.
●
: Offline.
Entering Delay Time Entrance delay time.
Exiting Delay Time Exit delay time.
24 H Protection Zone
Status
Active status of the 24 h protection zone.
●
: Enable.
●
: Disable.
Sensitivity
Adjust the sensitivity level of motion detection. The higher the value,
the easier the motion is detected.
Loading ...
Loading ...
Loading ...