Loading ...
Loading ...
Loading ...
Your new tractor has been assembled at the factory with exception of those parts left
unassembled for shipping purposes. To ensure safe and proper operation of your tractor
all parts and hardware you assemble must be tightened securely. Use the correct tools
as necessary to insure proper tightness. Reviewthe video cassette before you begin.
TOOLS REQUIRED FOR
ASSEMBLY
A socket wrench set will make assembly
easier. Standard wrench sizes you need
are listedbelow.
(1) 9116"wrench (1) 3/4" Socket w/
(1)Pliers drive rachet
(1) 112"wrench (1) PhillipsScrew-
(1) Utilityknife driver
(1) "[]repressure gauge
When right or left hand is mentioned in
this manual, it means, from your point of
view, when you are in the operating posi-
tion (seated behind the steering wheel).
TO REMOVE TRACTOR FROM
CARTON
UNPACK CARTON
• Remove all accessible loose parts and
parts boxes from shipping carton (See
page 6).
• Cut, from top to bottom, along lines on
all four comers of shipping carton, and
lay panels flat.
• Check for any additional loose parts or
boxes and remove.
BEFORE ROLLING TRACTOR OFF
SKID
ATTACH STEERING WHEEL
• Remove hex bolt, lock washer and large
flat washer from steering shaft.
• Position front wheels of the tractor so
they are pointing straight forward.
• Slide the steering sleeve over the steer-
ing shaft.
° Align tabs and press steering sleeve
extension into bottom of steering wheel.
i osition steering wheel so cross bars
are horizontal (left to right) and slide
onto steering wheel adapter.
Secure steering wheel to steering shaft
with hex bolt, lock washer and large flat
washer previously removed. Tighten
securely.
• Snap steering wheel insert into center
of steering wheel.
• Remove protective materials from trac-
tor hood and grill.
IMPORTANT: Check for and remove any
staples in skid that may puncture tires
where tractor is to roll off skid.
i i_ i _.-.- Steering
I_Hex Bolt
_..._- Lock Washer
Large Flat
__ Washer
Steedng
Steering Wheel
Wheel Adapter
Steering _ Tabs
Sleeve I
Extension __ -__
,\\
Shaft ' I_l
Ii
II
Steering "i
Sleeve __-", //
TO ROLL TRACTOR OFF SKID (See
Operation section for location and
function of controls)
i ress lift lever plunger and raise attach-
ment lift lever to itshighest position.
Release parking brake by depressing
clutch/brake pedal.
Place gearshift lever in neutral (N) posi-
tion.
• Roll tractor forward off skid.
• Remove mower and packing materials.
• Remove ties from V-belts.
8
Loading ...
Loading ...
Loading ...