Loading ...
Loading ...
Loading ...
Terminal
Access
Door
Keps Nut
Hex Bolt
Positive
Cable
Terminal Negative (Black)
Guard Gable
TO REPLACE HEADLIGHT BULB
• Raise hood.
• Pull bulb holder out of the hole in the
backside of the grill.
• Replace bulb inholder and push bulb
holder securely back into the hole in the
backside of the grill.
• Close hood.
INTERLOCKS AND RELAYS
Loose or damaged wiring may cause your
tractor to run poorly, stop running, or pre-
vent it from starting.
• Check wiring. See electrical wiring dia-
gram in the Repair Parts section.
TO REPLACE FUSE
Replace with 30 amp automotive-type
plug-in fuse. The fuse holder is located
behind the dash.
TO ADJUST ATTACHMENT UFT
SPRING
° While holding spring bushing with
wrench, loosen jam nut.
• Turn adjustment bolt clockwise to
extend spring and reduce lift effort for
heavier attachments.
• Turn adjustment bolt counterclockwise
for lighter attachments.
• Retighten jam nut against spring bush-
ing.
IMPORTANT: Do not adjust for maximu
spring tension when using light attach-
ments such as a mower. Adjust lilt lever
spring to aid in lifting attachment. Do nol
overpower spring. When removing attact
ment, always adjust spring tension to its
lowest position.
Jam Nut Spring
Bolt
TO REMOVE HOOD AND GRILL
ASSEMBLY
• Raise hood.
• Unsnap headlight wire connector.
Stand in front of tractor. Grasp hood al
sides, tilt toward engine and lift off of
tractor.
• To replace, reverse above procedure.
Hood_!
Headlight
Wii'e ctor
29
Loading ...
Loading ...
Loading ...